Dvig. tech. judesio jutiklis su laikikliu SATEL SLIM-PIR-PRO Grade 3

The SLIM-PIR-PRO detector detects motion in the protected area.

·       certificate of compliance with the EN 50131 requirements for Grade 3

·       motion detection using passive infrared (PIR) sensor

·       adjustable sensitivity of detection

·       digital motion detection algorithm

·       digital temperature compensation

·       option to enable/disable the creep zone protection

·       wide-angle lens, designed specifically for SLIM LINE detectors

·       option to replace the wide-angle lens with a curtain (CT-CL) or long-range (LR-CL) one

·       active IR anti-masking, compliant with EN 50131-2-2 for Grade 3

·       ability to configure detector operating parameters using the OPT-1 keyfob

·       built-in end-of-line resistors (2EOL: 2 x 1,1 kΩ / 2 x 4,7 kΩ / 2 x 5,6 kΩ)

·       LED indicator

·       selectable color of the LED indicator (7 colors available)

·       LED indicator remote enable/disable

·       configuration mode remote enable/disable

·       supervision of motion detection and supply voltage circuit

·       tamper protection against opening of enclosure and removal from mounting

·       adjustable mounting holder (BRACKET D) included, provided with tamper switch

Technical data

·       Supply voltage: 12 V DC

·       Detected target velocity: 0,2...3 m/s

·       Operating temperature range: -10°C...+55°C

·       Recommended mounting height: 2.4 m

·       Standby mode current consumption: 20 mA

·       Max. current consumption: 82 mA

·       Weight: 142 g

·       Maximum humidity: 93±3%

·       Dimensions: 62 x 137 x 42 mm

·       Environmental class according to EN50130-5: II

·       Alarm signaling time: 2 s

·       Complied with standards: EN 50131-1, EN 50131-2-2, EN 50130-4, EN 50130-5

·       EOL resistors: 2 x 1.1 kΩ / 2 x 4.7 kΩ / 2 x 5.6 kΩ

·       Warm-up period: 30 s

·       Security grade according to EN50131-2-2: Grade 3

·       Detection area: 20 m x 24 m, 90°

·       Alarm outputs (NC relay, resistive load): 40 mA / 24 V DC

·       Tamper outputs (NC relay, resistive load): 40 mA / 24 V DC

·       Anti-masking outputs (NC relay, resistive load): 40 mA / 24 V DC

·       Relay contact resistance (alarm output): 26 Ω

·       Permissible installation height: up to 4 m

·       Relay contact resistance (tamper output): 26 Ω

·       Relay contact resistance (anti-masking output): 26 Ω