The IU2055NC is connected to the panel via a two-wire communication loop that provides power and carries control and input data. The module address is easily set with two rotary switches. The address setting is non-volatile and will not be lost in the event of a power failure.
The 2000 series conventional zone monitor utilizes an advanced digital data communications protocol that ensures the integrity of the data communication with extensive error correction algorithms.
Details
- Monitors up to 30 standard conventional or up to 20 intrinsically safe conventional detectors
- Zone supervised for open and short circuits
- Supports alarm verification and CleanMe™ functions
- Loop powered
- Easy numeric addressing
- Supports standard and intrinsically safe applications
- CE/CPR certified to EN54:18
| General |
| Status indication |
Fault LED |
| Compatibility |
2000 Series Systems |
| Electrical |
| Operating voltage |
21 to 28 VDC (Loop) 17.5 to 18.5 VDC (Zone) |
| Current consumption |
< 15 mA (Standby) < 40 mA (Alarm) < 3.6 mA (Remote Indicator) |
| Input |
| Input quantity |
1 |
| Input type and rating |
Supervised - 19.4 mA max. |
| Supervisory voltage |
17.5 to 18.5 VDC |
| Termination resistor |
3.9 kΩ, ¼ W, 5% |
| Zone Resistance - Normal mode |
< 40 Ohm |
| Zone Resistance - Intrinsic safe mode |
< 26 Ohm |
| Output |
| Output quantity |
1 (Remote indicator) |
| Output type and rating |
Unsupervised, 3.6 mA |
| Physical |
| Physical dimensions |
175 x 124 x 51 mm |
| Net weight |
325 g |
| Colour |
White |
| Mounting type |
Wall mount |
| Cable entries |
1 |
| Material |
Plastic |
| Environmental |
| Vandal-proof |
No |
| Operating temperature |
−10 to +55°C |
| Storage temperature |
−20 to +60ºC |
| Relative humidity |
10 to 95% noncondensing |
| Environment |
Indoor, IS |
| IP rating |
IP40 |
| Standards & regulation |
| Compliancy |
CE, REACH, RoHS 2 |
| Certification |
EN54-18 |